RCY-808T智能溶出仪采用直线轴承,与掀盖式溶出仪比,机头可以电动升降,运动重复性好。配有专用的溶出杯杯圈,可以确保溶出杯与水箱盖板紧密结合。采用优质不锈钢材料制造的桨杆、篮杆和网篮体,质量性能符合中国药典的要求。 RCY-808T智能溶出仪性能特点 • 机头电动升降。采用直线轴承,运动重复性好。 • 溶出杯盖全密封,保温性能好。 • 计时器有三种工作状可供选择。 • 具有自动检测和自动保护功能,能给出多种故障提示信号。 • 采用优质不锈钢材料制造的桨杆、篮杆和网篮体,质量性能符合中国药典的要求。 • 专用的溶出杯圈,确保溶出杯与水箱盖板配合紧密,并且溶出杯中心与水箱盖板中心一致。 • 全部工作参数可预置并自动存储,下次开机无须重复设置。转速准确,运行平稳,能耗低。 • 恒温水溶采用内置集成温度传感器和新的软、硬件温度测控方式,升温快,精度高,可方便地用软件校正温度偏差。 技术指标 • 调温范围:10.0(室温)-45.0℃ • 温度分辨率:0.1℃ • 测控温误差:≤±0.3℃ • 取样周期个数:最多12个不同的取样周期 • 定时开/关机时间:最长99小时59分钟 倒计时 • 连续工作时间:48小时 • 电源:AC 220V±% 50Hz 1350W • 工作环境条件:温度5-35℃,相对湿度≤80℃ • 转杆位置数量:8个 • 溶出杯数量:8个 • 桨杆摆动幅度:≤±0.5mm • 转篮摆动幅度:≤±1mm • 转杆与溶出杯同轴度:≤2mm • 调整范围:10-300转/分 • 转速分辨率:1转/分 • 稳速误差:≤≥±4% 符合《中华人民共和国药典》规定 RCY-808T INTELLIGENT DISSOLUTION TESTER The instrument meets the generic quality consistency evaluation RCY-808T (Test status) registered trademark: Haiyida proprietary product In summarizes many year productions to the dissolutiontester in success empirical base, RCY-808T dissolution tester is our companyuses advanced technology and components to decelop a new drug dissolutiontester. The instrument adopts the high quality LCD touch screen, the "mainmenu" and "basic experiment" option can be convenient to theconventional repetitive trials or research. Features: • Using high quality LCD touch screen, the operationinterface intuitive and easy to be used • Produced by electric lift • On center pole with dissolution cup automatic positioning • Speed control using stepper motor, smooth operation, lownoise • With functions of temperature control self-inspection • Basket, paddle and small cup method from the bottom of thecup height automatic positioning • Has the user management function, logins user account bythe user name and password, can undertake various parameters under this accountset up and run the test • Storage can be preset 27 groups of experimental parameters • Timing shutdown, timing, automatic preheating function • Ultra, ultra high temperature alarm and secondary overheatingprotection function Specifications: • Wobble of paddle: ≤0.5mm • Number of sampling intervals: maximum 25 • Sampling cycle time: maximum 99 hours 59 minutes per cycle • Working noise: <60dB • Power requirement: AC 220V±10% 50 Hz,800W • Environment requirement: temperature 5 to 37℃, humidity ≤80% • Safety performance: in line with national industrystandards In compliance with the CP standards |